Does your USB stick properly support being booted from? (Try another one!).Have you correctly prepared the USB disk in step two? (Restart the procedure.).Is your BIOS properly configured for booting from the USB disk? (Is the USB device listed and does it have top priority?).If it isn’t working, then double-check the following before making a scene: Depending on the speed of your USB device, this may take a while. Be aware though, that you can seriously screw up your system by providing incorrect settings!Īssuming that you properly configured your BIOS and your USB device supports booting, BartPE should now load. If you’re completely new to BIOS configuration, over at Tom’s Hardware might be a good primer. Exit from the BIOS configuration, saving all changes. Assuming that it is supported (as is the case with virtually all modern hardware), promote your USB drive to the primary boot device.ĥ. If it isn’t, your system might not support booting from USB. With your USB drive plugged in, the USB drive should be listed. Go to the section that contains your boot devices.Ĥ. Hotkey instructions are generally provided on the screen.ģ. While booting (before Windows starts loading), get into the BIOS configuration screen by hitting something like F1, F2, Delete or Escape. Instructions for doing so wildly from system to system, but generally entail the following:Ģ. You should now reboot and go into the BIOS configuration to boot from USB. If no errors occured in the above process, you should now be all set to boot from USB!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |